内编队地球重力场测量性能数值分析

内编队系统通过实现内卫星纯引力轨道环境和内卫星精密定轨,完成高精度地球重力场测量,实现了不依赖于加速度计的重力卫星实施新途径。针对内编队重力场测量性能难以解析分析的情况,基于MATLAB并行程序设计进行了重力场测量数值模拟,获得了内编队重力场测量的有效阶数及其精度。在内编队轨道高度为300km、内卫星干扰力为1.0×10-10m/s2、外卫星定轨精度为3cm、内外卫星相对状态测量精度为1mm的条件下,计算得到内编队测量重力场的有效阶数为72,相应的大地水准面累积误差为44cm,重力异常累积误差为4.5mGal,由此可知内编队测量重力场的有效阶数主要分布在低阶部分。     

基于组合赋权雷达图实现电网电能质量综合评估

将改进的组合赋权雷达图方法用于电网电能质量综合评估。对主观、客观赋权法组合,基于组合权重与原权重之间的偏差尽可能小的优化思想,求取雷达图中各项指标的组合权值。利用各指标对应的扇形区域的对角线作为指标轴绘制雷达图,不仅最大限度体现各指标的独立权重,也反映了各指标之间的相互影响。利用雷达图的面积和周长两个变量完成对电能质量的综合评估。最后通过应用实例,验证了论文方法的合理性和在电能质量综合评估中的有效性。     

基于联合相似测度的SAR图像边缘点特征配准方法

针对SAR图像配准过程中几何变换影响特征匹配稳健性和适应性的问题,提出了一种在特征匹配过程中直接解算几何变换模型的边缘点特征配准方法。利用SAR图像边缘点的梯度和方向特征,基于像素迁移思想,定义了图像匹配的联合相似度——联合特征均方和(SSJF),并建立了SAR图像边缘点集相似性匹配准则;基于方向模板提出了改进的ROEWA算子;利用改进的遗传算法(GA)来进行相似度的全局优化搜索,获取配准模型参数;利用多幅SAR图像的配准试验,对本文方法的性能进行了验证。     

The surface activation of boron to improve ignition and combustion characteristic

Boron is a very promising and highly attractive fuel because of high calorific value. However, the practical applications in explosives and propellants of boron have been limited by long ignition delay time and low combustion efficiency. Herein, nano-Al and graphene fluoride (GF) as surface activated materials are employed to coat boron (B) particles to improve ignition and combustion performance. The reaction heat of nano-Al coated B/KNO₃ and GF coated B/KNO₃ are 1116.83 J/g and 862.69 J/g, respectively, which are higher than that of pure B/KNO₃ (823.39 J/g). The ignition delay time of B/KNO₃ could be reduced through nano-Al coating. The shortest ignition delay time is only 75 ms for B coated with nano-Al of 8 wt%, which is much shorter than that of pure B/KNO₃ (109 ms). However, the ignition delay time of B/KNO₃ coated with GF has been increased from 109 to 187 ms. B coated with GF and nano-Al shown significantly influence on the pressure output and flame structure of B/KNO₃. Furthermore, the effects of B/O ratios on the pressure output and ignition delay time have been further fully studied. For B/KNO₃ coated with nano-Al and GF, the highest pressures are 88 KPa and 59 KPa for B/O ratio of 4:6, and the minimum ignition delay time are 94 ms and 148 ms for B/O ratio of 7:3. Based on the above results, the reaction process of boron coated with GF and nano-Al has been proposed to understand combustion mechanism.     

基于可组合服务的陆军作战仿真模型集成

陆军仿真模型体系的复杂性决定了其建模与集成的复杂度,本文基于模型组件化技术,设计了模型组件库、对象库,通过逻辑组合实现了基本库和作战单元库,并以可组合的模型服务实现不同分辨率、异构模型的聚合集成目标,使得陆军作战仿真模型具备模块化、可复用、可扩展和可控制的应用特点和战技术性能。     

潜射无人机及其对潜艇作战带来的变化

从水下航母的历史出发,简述了现代战争对潜射无人机的需求,分析了潜艇(尤其是核潜艇)装备潜射无人机的优势和给作战带来的变化,说明了它对发展水下航母的重要性。之后,以美国潜射无人机研发为例,总结了其研究进展,探讨了它目前面临或需要解决的问题,表明了其发展方向。     

基于营区精、气、神文化表达的自然仿生设计

精、气、神文化是营区规划设计的核心.自然仿生设计为营区精、气、神文化的表达提供了独特而有效的方式.通过对营区精、气、神文化的解读,发掘出自然仿生的3个层面,即“形”之仿生,“意”之仿生和“结构”之仿生.在营区规划设计中,当自然仿生的这3个层面得到有效表达,实现有机统一,营区就会产生独特的文化气质与魅力,从而体现其精、气、神特色,展现部队的“军营魂”.     

雷达虚拟维修训练中交互系统的通用性

基于USB接口技术对"通用雷达装备虚拟维修训练系统(URVMTS)"的人机交互系统进行研究,通过合理的软、硬件设计实现了系统的通用性。不同的实装操作部件经过适当的信号调理均可以通过该系统方便地实现与雷达虚拟样机之间的交互。着重介绍了交互系统的通用性设计与实现方法,包括系统的通用性设计方案,USB硬件电路的通用性设计及相应的软件开发。     

固体推进剂裂纹摩擦热点形成细观模型分析

分析机械撞击载荷作用下复合固体推进剂内部裂纹摩擦形成热点过程。研究在压应力与剪切应力作用下闭合裂纹滑移、扩展、摩擦生热、热扩散、推进剂热分解及与气相产物相互作用。利用断裂力学、热传导、推进剂热分解动力学方法,建立裂纹摩擦热点细观模型。通过模型数值计算,探讨推进剂裂纹摩擦产生高温热点的过程和条件。分析计算表明裂纹摩擦和扩展可导致推进剂形成高温热点。     

Generating Pareto‐optimal boundary points in multiparty negotiations using constraint proposal method

In this paper a constraint proposal method is developed for computing Pareto‐optimal solutions in multiparty negotiations over continuous issues. Constraint proposal methods have been previously studied in a case where the decision set is unconstrained. Here we extend the method to situations with a constrained decision set. In the method the computation of the Pareto‐optimal solutions is decentralized so that the DMs do not have to know each others' value functions. During the procedure they have to indicate their optimal solutions on different sets of linear constraints. When the optimal solutions coincide, the common optimum is a candidate for a Pareto‐optimal point. The constraint proposal method can be used to generate either one Pareto‐optimal solution dominating the status quo solution or several Pareto‐optimal solutions. In latter case a distributive negotiation among the efficient points can be carried out afterwards. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 210–225, 2001